Red "SRINKLER WATER" Wrap-Tite Coiled Industrial Pipe Marker

In stock
Red "SPRINKLER WATER" Wrap-Tite Coiled Industrial Pipe Marker

This item will ship direct from manufacturer.

*Shipped flat along with nylon ties.


Wrap-Tite pipe markers are designed to last. Subsurface printing endures that the legend and color field remain visible, even after years of use. Wrap-Tite markers wrap snugly around pipe with outside diameters of up to 6", allowing for visibility and quick identification from all angles. For pipes with an overall diameter greater than 6", stainless steel springs are included to hold the marker firmly in place.

  Outside pipe diameter: Letter height:
Style A 3/4"- 1-3/8" 1/2"
Style B 1-1/2"- 2-3/8" 3/4"
Style C 2-1/2"- 3-7/8" 1-1/4"
Style D 3-3/8"- 4-1/2" 1-1/4"
Style E 4-5/8"- 5-7/8" 1-1/4"
Style F 6"- 8" 1-1/4"
Style G 8"-10" 2-1/2"
Style H 10" and over



  • Wrap-Tite Pipe Markers conform to all ANSI A13.1 specifications for color, length of color field, wording, etc.
  • Huge labor savings
  • Sturdy plastic construction resists damage in most environments, and installation is easy indoors and out
  • No need to remove any dirt or surface rust before installing - Markers wrap completely around the pipe
  • No adhesive needed
  • No need to buy directional flow arrow tape, flow arrow is printed on every marker
  • Re-use markers when sections of pipe are removed or replaced
  • Sub-surface printed for durability

Webinars available; please contact us for more information. Lunch-and-Learns available if in Ohio.

File Downloads

(Size: 1.3 MB)
Write Your Own Review
You're reviewing:Red "SRINKLER WATER" Wrap-Tite Coiled Industrial Pipe Marker